A durable , strong and flexible exterior sealer which provides UV - protection and water - repellence .
Use on exterior wooden surfaces exposed to extreme weathering and wear. !
Durable, tough and flexible !
Excellent UV-protection and water repellence !
Quick drying !
Easy to apply !
Low odour on application !
Easy maintenance !
Proper film-build is essential !
Seal all aspects of the wood !
Seal end grain very well !
For optimal lifespan, use with Woodoc Water-Borne Plus-Life PRIMER Maintenance: Check wood regularly and re-apply product according to instructions when weathering starts.
HOW TO PREPARE THE SURFACE General:
Wood must always be clean, dry & smooth before use of product. Never wash/wipe wood with water/solvent before applying the product. New wood: Sand until smooth. Remove dust. Previously varnished/sealed/oiled/waxed wood: Sand until bare and smooth. Start with a coarse grit sandpaper and end with a fine grit. Remove dust. The use of paint strippers is not recommended. Wood previously treated with this product: Sand lightly to key the surface and to ensure proper binding between old and new layer. Remove dust. Weathered Wood:Sand weathered wood to remove all traces of weathering or use Woodoc Wood Reviver according to instructions.
Stir well with flat paddle before and during application. Do not shake or dilute product. Apply product with good-quality brush. Apply first coat until surface remains evenly glossy for at least 10 minutes after application. Apply more product to dull/dry areas. Allow coat to dry completely. Sand lightly with very fine sandpaper. Remove dust. Apply two more coats in the same way. Do not sand after third coat. Always apply a minimum of three coats.
± 10 m²/litre per coat (± 3,3m² per litre for 3 coats)